TRS 80 Model 100 Cassette Interface Cable for PC

At the time when I was about to replace TRS 80 Model 100 NiCad Battery. I have a few programs on it that I need to make a backup of before replacing the battery.

I don’t have a null modem cable or any other means of saving the data.

So, I went a head and created a custom cable to record these backup using my laptop through the Mic input and Audacity program. With this cable, it’s also possible to record program on these cheap MP3 recorder using the Mic input as well.

Below is a drawing of the cassette interface which use a simple voltage divider to reduce the line audio to a level which is suitable for laptop Mic input.


To capture a recording, press record on Audacity and type in the following command on the laptop to begin saving the program.

save “”

To reload the program, type in the following command on the laptop and press play on Audacity.

load “”

Common Loading Problems

  • A weak, noisy recording in the recorded audio might cause loading problem. This is because most vintage cassette interface use zero crossing detection circuit to detect 0 or 1 by counting number of crossing in given period. Any noise introduced in the audio might cause false reading. In case of weak signal, increase the volume and most of the time it would fix the problem. If the recorded audio is noisy, try disconnecting the power adapter on TRS 80 Model 100 and run it on battery to reduce hum.
  • If you’re recording in stereo, make sure the channel that feed the ear input has audio. Otherwise switch the channel or record in mono instead. Alternatively connect the ear input to both left and right channel.
  • If you are still having problem with loading, use Audacity to zoom in and look at the recorded audio. Ensure that the recording is not clipping and audio signal is utilizing the entire range. Otherwise increase Mic sensitivity or adjust the resistor ratio to increase the Mic input level. Below is a decent sample of good recording.



3 thoughts on “TRS 80 Model 100 Cassette Interface Cable for PC”

  1. Hello, I am interested in making an acoustic coupler for the TRS-80 Model 100, but I do not know the name of the phone cable, I believe it is some sort of a DIN, but i am not sure. If you have any information, please reply. Thanks! I loved your project.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s